LVT Flooring · SW18LVT Flooring in
LVT Flooring in
Wandsworth.
Free home visit · Fixed price · Uplift & disposal included
Free home visit · Fixed price · Uplift & disposal included
Floors & Fix fits LVT across Wandsworth — from Earlsfield Victorian terraces to Wandsworth Riverside Quarter new-builds. LVT over ply-boarded suspended timber is the standard specification for older Wandsworth properties; floating LVT over acoustic underlay for riverside UFH apartments. Fixed price at your free home visit.
Wandsworth covers a broad sweep of Victorian terraces and Edwardian semis through Earlsfield, Southfields, and Tooting Broadway, with new riverside developments at Wandsworth Riverside Quarter. Pre-1940 housing overwhelmingly has suspended timber ground floors. New riverside flats have screed and underfloor heating. Conversion flats are common throughout the older terrace stock.
62% 62% of Wandsworth's housing stock was built before 1945 according to ONS Census 2021 data, meaning the majority of properties in the borough have suspended timber ground floors that need correct assessment and preparation before hard flooring installation. — ONS Census 2021 — Wandsworth dwelling age profile
LVT is the dominant hard floor in Wandsworth's renovation market — particularly across the dense Victorian and Edwardian terrace stock in Earlsfield and Southfields. In these properties, correct subfloor preparation is everything: ply boarding the suspended timber to a flat, firm base before laying. We encounter a higher-than-average incidence of blocked under-floor airbricks in Wandsworth terraces, leading to elevated moisture readings that must be resolved before LVT installation proceeds. In Wandsworth Riverside Quarter, LVT floating over a 2 mm acoustic foam underlay rated for UFH is the standard approach — the acoustic layer also satisfies building acoustic requirements. Kitchen extension transitions between suspended timber and screed are handled with self-levelling compound for a seamless finish.
The grid of Victorian and Edwardian terraces around Earlsfield station — Tranmere Road, Huron Road, Magdalen Road — are well-maintained South London streets with consistent suspended timber ground floors. Joist spans are typically 3.5–4.5 m, which can give a springy feel in the centre of a room. Ply boarding before LVT or laminate is standard. Many have had kitchen extensions added at ground level with concrete or screed subfloors.
LVT click-lock planks bridge across joists without support, causing joints to stress and separate over time on a deflecting suspended timber floor. Before any LVT is laid we install 6mm structural ply, screwed at 200mm centres, to create a rigid, flat deck. On floors where deflection is marginal we use glue-down LVT as an alternative — it distributes load across the adhesive bed rather than relying on the click joint. Ply supply and fixing is included in your fixed price.
Southfields' wide avenues — Replingham Road, Sutherland Grove, Victoria Drive — have substantial Edwardian semis with deeper joist spans and larger room areas. Ground floors are suspended timber throughout in properties built before 1920. The Southfields Conservation Area contains properties with original parquet or softwood board floors that require careful assessment if being overlaid rather than replaced.
LVT click-lock planks bridge across joists without support, causing joints to stress and separate over time on a deflecting suspended timber floor. Before any LVT is laid we install 6mm structural ply, screwed at 200mm centres, to create a rigid, flat deck. On floors where deflection is marginal we use glue-down LVT as an alternative — it distributes load across the adhesive bed rather than relying on the click joint. Ply supply and fixing is included in your fixed price.
The Wandsworth Riverside Quarter development along the Causeway and Smugglers Way has screed subfloors and underfloor heating as standard across all phases. These are high-spec flats where service charge provisions often specify approved flooring types and minimum acoustic ratings. UFH-compatible LVT or engineered wood is the usual specification; carpet is also permitted but must be within tog limits.
On underfloor heating screed we always specify glue-down LVT rather than click-lock — continuous heat cycling can cause click joints to stress in some products, whereas a full glue-down bond remains stable across the temperature range. Total thermal resistance of the LVT and any underlay must be ≤0.15 m²K/W to protect heating efficiency. UFH compatibility is confirmed in writing on every quote.
Victorian terraces across Earlsfield and Southfields have been widely converted into two-flat arrangements. Upper flats have original suspended timber with chipboard overlays of variable age and quality. Ground-floor flats, particularly those with limited under-floor ventilation on narrower terrace streets, are prone to elevated moisture readings. Acoustic requirements from freeholders are standard in the Wandsworth borough.
LVT click-lock planks bridge across joists without support, causing joints to stress and separate over time on a deflecting suspended timber floor. Before any LVT is laid we install 6mm structural ply, screwed at 200mm centres, to create a rigid, flat deck. On floors where deflection is marginal we use glue-down LVT as an alternative — it distributes load across the adhesive bed rather than relying on the click joint. Ply supply and fixing is included in your fixed price.
Yes — LVT is our most common specification for Earlsfield Victorian terrace kitchens. We ply-board the suspended timber subfloor, check moisture, and lay LVT for a waterproof, low-maintenance finish. We run continuously from kitchen into hallway for a consistent look.
Yes — we use LVT rated for UFH, floating over a 2 mm acoustic foam underlay. The system must be at ambient temperature during installation and ramped up gradually after fitting. We advise on the correct commissioning procedure.
For LVT in upper-floor conversion flats we use a 1.5–2 mm acoustic foam underlay providing 19–21 dB impact sound reduction. Some LVT products have an integrated acoustic backing. We supply the technical data sheet for managing agent approval if needed.
This is a common scenario in Earlsfield and Southfields. We use self-levelling compound to bring the concrete extension slab up to the level of the ply-boarded suspended timber, then run LVT continuously across the transition. A well-executed transition is invisible in the finished floor.
A ground-floor kitchen-diner, hallway, and WC in an Earlsfield or Southfields semi — typically 35–50 m² — takes one full day including ply boarding, uplift, and fitting. We quote inclusive prices with no extras.
We come to you with samples, measure up and give you a fixed price on the day. No obligation, no deposit. See our lvt flooring service or all flooring options in Wandsworth.
Last updated: May 2026